Firma AC se značkou STAG je Polský světový lídr ve výrobě LPG a CNG systémů
Certifikáty
Nacházíte se zde: Úvod › Diskusní fórum STAG LPG/CNG › Strana 6 › Engine won't start with Qbox basic
Diskusní fórum STAG LPG/CNG - Engine won't start with Qbox basic
Vítejte na diskuzním fórum LPG a CNG, kde se prioritně zabýváme značkou STAG, která je jedničkou ve svém oboru, což jsou LPG a CNG zařízení. Můžete se zde ptát na přestavby, montáže, revize, servisy LPG a CNG zařízení. Samozřejmě rádi odpovíme i na všechny otázky okolo plynu (gas) jako je například problematika ochrany ventilů, pojištění LPG a CNG, atd.. Prioritně však budeme odpovídat na dotazy týkající se značky STAG.
+ Nový dotaz
4.6.2022 17:42:02
Jméno: Gerbert Wernink, the Netherlands Předmět: Engine won't start with Qbox basic
I installed the Qbox basic controller with an AC R01 reducer and AC W02 injector rail in a Citroën Xsara 1.8i 8v automatic with 101hp. It has a Magneti Matelli injection system. After connecting all wires according to the diagram, the car will not start, not even on petrol. I measured the connections from the petrol injectors back to the AC STAG connector and everything is according to the pin schedule. RPM comes from the coil and is also well connected. Everything seems to be fine, also in the software is everything available. But......the car will not start. I reconnected 2 petrol injectors in the "normal" way, controlled by the ecu of the car and it starts right away!
What is wrong?
Jméno: Gerbert Wernink, the Netherlands Předmět: Engine won't start with Qbox basic
I installed the Qbox basic controller with an AC R01 reducer and AC W02 injector rail in a Citroën Xsara 1.8i 8v automatic with 101hp. It has a Magneti Matelli injection system. After connecting all wires according to the diagram, the car will not start, not even on petrol. I measured the connections from the petrol injectors back to the AC STAG connector and everything is according to the pin schedule. RPM comes from the coil and is also well connected. Everything seems to be fine, also in the software is everything available. But......the car will not start. I reconnected 2 petrol injectors in the "normal" way, controlled by the ecu of the car and it starts right away!
What is wrong?
6.6.2022 7:41:49
Jméno: Procházka Evžen Předmět: Re: Engine won't start with Qbox basic
Hello, if everything is connected correctly and only the sequence of gas injectors is reversed, then the engine always starts, but after switching to LPG, the engine runs erratically and can even switch off the engine. Check that the power supply of the LPG system is connected correctly.
Jméno: Procházka Evžen Předmět: Re: Engine won't start with Qbox basic
Hello, if everything is connected correctly and only the sequence of gas injectors is reversed, then the engine always starts, but after switching to LPG, the engine runs erratically and can even switch off the engine. Check that the power supply of the LPG system is connected correctly.
Přidat záznam
Zajímá Vás víc?
Kontakt
TECHNICKÁ PODPORA STAG
PRO SMLUVNÍ PARTNERY
Král Pavel
e-mail: technik@autogascentrum.cz
mobil: +420 602 518 625
telefon: +420 383 324 912
Zavolejte mi
Napište nám
prave menu